The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution is ideal for both commercial and residential installations.

Features

• Advanced UHD video over 1Gb Network
• Virtually unlimited system size
• Connect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distribution
• Supports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0) ** NOTE: HDR support is dependant on video signal bandwidth. Please see table in product manual for reference.
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
• Video up-scaling and down-scaling
• Features 4 operational modes: Matrix distribution (Requires 1Gb network switch) Video wall (Requires 1Gb network switch) One-to-one HDMI extender (No network switch required) One-to-many HDMI splitter (No network switch required)
• HDCP 2.2 Compliant
• Advanced EDID management
• Analog L/R audio embedding and de-embedding on XT-4K-VIP-TX Transmitter
• Analog L/R audio breakout on XT-4K-VIP-RX Receiver
• Bi-directional RS-232 and IR pass through
• USB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devices
• PoE (Power over Ethernet) to power Xantech products from PoE switch
• Local 24V 1A power input should network switch not support PoE, sold separately
• Simple configuration via web-GUI through the XT-4K-VIP-ACM
• HDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz only
• RS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACM"

Specifications

• Video input 1 x HDMI Type A, female
• Audio input 1 x 3.5mm L/R analog audio
• Audio output 2 x RCA L/R analog audio
• Video output/Ethernet port 1 x LAN RJ45 connector (PoE 9W)
• USB / KVM 2 x USB, Type A
• RS-232 serial port 1 x 3-pin Phoenix connector
• IR input 1 x 3.5mm stereo jack
• IR flasher 1 x 3.5mm mono jack
• Firmware update 1 x USB Micro B
• Accessories Mounting kit included
• Dimensions (W x D x H ) 190mm x 114mm x 25mm
• Shipping weight (Kit) 0.8kg
• Operating temperature 32°F to 104°F (0°C to 40°C)
• Storage temperature -4°F to 140°F (-20°C to 60°C)